Tilemaster Adhesives’ Eco-3000 is a high temperature flooring adhesive that is suitable for installing LVT, PVC, vinyl and rubber flooring as well as carpet, textiles and uncoupling membranes onto a wide variety of substrates. The new adhesive has been formulated to be solvent-free with very low VOC emissions, having achieved the rating of EMICODE EC1 Plus, and has been specially developed to provide excellent adhesion properties curing to a hard set with a high bond strength.
Tilemaster Eco-3000 is ideal for use over underfloor heating systems and in conservatories, as well as other buildings with large expanses of glass where direct sunlight may heat the floor. It has been formulated with the installer in mind, with a fast tacking-off time, allowing flooring to be installed after as little as 10 minutes, when the adhesive is semi-tacked off and has reached its ‘anti-slide’ state. Full tacking off takes 40 minutes and the floor is ready for light foot traffic after 12 hours.
Tilemaster Silicone 3000+ is a low modulus, neutral cure sealant with excellent adhesion properties which is suitable for use on a large variety of surfaces including LVT, PVC, vinyl, ceramic, glass, porcelain and natural stone. When cured Tilemaster Silicone 3000+ is highly flexible and will accommodate movement between two surfaces. Available in a range of 18 colours to match to the flooring, it is suitable for interior and exterior use, waterproof and very easy to apply, smooth and clean off.
